 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION RL1N1000F THRU RL1N1800F PHOTOFLASH RECTIFIER VOLTAGE RANGE 1000 to 1800 Volts CURRENT 0.5 Ampere FEATURES * * * * High reliability Low leakage Low forward voltage drop High current capability A-405 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.20 gram 1.0 (25.4) MIN. .025 (0.6) DIA. .021 (0.5) .205 (5.2) .166 (4.2) .107 (2.7) .080 (2.0) DIA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current at TA = 55 oC Peak Forward Surge Current IFM (surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO IFSM CJ TJ, TSTG RL1N1000F RL1N1200F RL1N1400F RL1N1600F RL1N1800F 1000 700 1000 1200 840 1200 1400 980 1400 500 25 10 -65 to + 175 1600 1120 1600 1800 1260 1800 UNITS Volts Volts Volts Amps Amps pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25 oC Maximum Full Load Reverse Current Average, Full Cycle .375" (9.5mm) lead length at TL = 55 oC Maximum Reverse Recovery Time (Note 1) NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF RL1N1000F RL1N1200F RL1N1400F RL1N1600F RL1N1800F 1.8 5.0 IR 100 trr 300 uAmps nSec 2001-6 UNITS Volts uAmps RATING AND CHARACTERISTIC CURVES ( RL1N1000F THRU RL1N1800F ) FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) CURRENT, (mA) 1.0 .8 .6 .4 .2 .1 .06 .04 .02 .01 .8 .9 1.0 TJ=25 Pulse Width = 300uS 1% Duty Cycle 600 500 400 300 200 100 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( ) Single Phase Half Wave 60Hz Resistive or Inductive Load 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 3 - MAXIMUM NON-REPETITIVE SURGE CURRENT FIG. 4 - TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE, (pF) PEAK FORWARD SURGE CURRENT, (A) 40 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) TJ = 25 30 8.3ms Single Half Sine-Wave (JEDEC Method) 20 10 0 1 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG. 1 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A (-) PULSE GENERATOR (NOTE 2) (+) 25 Vdc (approx) (-) D.U.T 0 -0.25A 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) (+) -1.0A NOTES:1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. 2. Rise Time = 10ns max. Souce Impedance = 50 ohms. 1cm SET TIME BASE FOR 50/100 ns/cm RECTRON |
Price & Availability of RL1N1600F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |